Freshwater applications / Saltwater applications

Knots

Unlike monofilament, PowerPro will not stretch on the reel and cling to the barrel. This can result in the line sliding around the barrel, which can seem like a problem with your drag mechanism. Rest assured though, your equipment is fine. To avoid slippage, attach PowerPro to your spool using one of these methods:

1. If your reel has a hole or knob on the barrel, use it.
2. Leave at least 5 to 10 yards of monofilament on the reel (enough to cover the bottom of the spool) before attaching PowerPro with a Uni to Uni splice.
3. Put a piece of arbor tape (comes in the pack) on the barrel before attaching Power Pro.

PowerPro is extremely strong, and nail clippers won’t cut it. We recommend sharp scissors such as the Rapala Super Line Scissors, which are inexpensive & easy to obtain - or use the cutter on the EZ Spool Pack.

PowerPro lines are so thin for their strength that you may be tempted to set your drag higher than normal, but remember, your rod or reel may not be designed to handle the same unbelievable loads as your line. To make full use of PowerPro’s amazing sensitivity without risking damage to your equipment, try one of the following tips:

1. Set your drag to match the weakest component in your tackle system.
2. Set your drag to match the size of mono line you would normally use.
3. When using ultralight equipment or line (11- 18lb test) set your drag to no more than 1/3 of the line's rated strength. You can check the drag with a set of scales.

At lower drag settings, a little extra line may pay out at the hookset, compensating for PowerPro's lack of stretch.

Anglers often set hooks like Samurai warriors beheading the enemy. This may be a fine technique with monofilament line, but PowerPro doesn’t require such a violent motion. When you get a strike, relax; a gentle snap of your wrist will set the hook. Because PowerPro doesn’t stretch like nylon lines, you won’t get that rubber-band effect. Every inch you move your rod tip equals an inch of movement at the lure.

Attaching a monofilament leader to your PowerPro line may prove useful in the following situations:

1. When lure fishing requires extra finesse, especially in clear water, use a 3-foot monofilament leader to cut down on line visibility.
2. When fishing for species that strike hard and fast, use a monofilament shock tippet. For close-in situations such as fishing with artificial lures, try a 3 to 10-foot tippet. For big game applications, you may want to use up to 100 yards or more.

PowerPro is remarkably thin and strong. To avoid injury, never wrap it around your fingers or hands.